ZHENGOU GroupZHENG'OU

Anwendung

Bodensanierung & alte Platten

Stauben, abgenutzter Beton und ein Produktionsplan, der wochenlang nicht stillstehen kann. Penetrierende Härter und Grundierungen bauen die Oberfläche wieder auf, ohne das Werk stillzulegen.

Was dieser Boden aushalten muss

Verstehen Sie das Versagensmuster, bevor Sie ein System wählen.

  1. 01

    Dusting concrete coats products, machinery and air filters — and it gets worse every year.

  2. 02

    The schedule cannot stop for weeks — the floor has to come back between shifts.

  3. 03

    Old coatings, oils and contamination decide what the new system can bond to.

  4. 04

    Budgets differ per zone — one factory rarely needs one solution everywhere.

Bodensanierung & alte Platten

Empfohlene Beschichtungssysteme

Ausgewählt nach Belastung — es gibt kein Universalsystem, nur das, das passt.

01

Sealed & densified floor (no coating)

Schichtaufbau
Grind off the weak layer → densifier reacts inside the slab → progressive polish

For dusting, worn slabs that must return to service fast: nothing to peel, low cost per square metre, long service life.

Produkte in diesem System

Standard-Verarbeitungssequenz

Derselbe Boden mit denselben Materialien hält Jahre länger, wenn sorgfältig gearbeitet wird. Die sechs Schritte unten sind unsere Standardsequenz für Epoxidharzböden: was jeder Schritt leistet, nach welchem Standard und was wir bei der Abnahme prüfen. Für Ihre Halle stimmen wir Anzahl der Schichten und Dicke auf die tatsächlichen Lasten, Chemikalien und das Stillstandsfenster ab.

  1. 01

    Substrate assessment

    Bond, contamination and moisture checks decide which renovation route is viable. The assessment decides between a resurfacing route and a full rebuild — pricing and schedule follow from it.

  2. 02

    Removal & repair

    Failed coatings and loose material ground off; cracks and holes repaired. After stripping, strength is re-tested; areas still short go deeper.

  3. 03

    Densifier route

    Penetration, reaction and progressive polishing bring the slab back harder than new. For dusting floors this route is preferred — no added film, the slab itself is hardened.

  4. 04

    Coating route

    Penetrating primer, build-up and a new topcoat matched to the zone duty. Renovation coatings lean on primer penetration; fast-absorbing areas take a double primer.

  5. 05

    Phased return to service

    Zones come back between shifts; production barely notices. Before each zone returns, a clean-down and protection briefing prevents cross-scratching.

Fotos von der Baustelle

Fertige Böden, vor Ort fotografiert — zum Vergrößern klicken und Details prüfen.

Densified old slab

A dusting floor brought back to a dense, polished surface.

Renovated working floor

New build-up over a sound slab — production never stopped.

Referenzprojekte

Eine Auswahl der von der Gruppe realisierten Projekte.

  • Automotive paint-shop renovation

    Renovating a live paint shop is a scheduling problem before it is a flooring one. For automotive clients including FAW, SAIC, Dongfeng, Beijing Benz, Geely, BYD, XPeng and NIO, we strip and re-lay floors zone by zone inside the owner's maintenance windows while the rest of the shop keeps producing.

  • Pharmaceutical workshop renewal without shutdown

    For clients such as Shineway Pharmaceutical, Huahai Pharmaceutical and Xinhua Pharmaceutical we have renewed workshop floors without stopping production: zoning, dust containment and low-odour solvent-free materials keep the clean areas clean while we work next door.

  • Residential garage refurbishment

    Older residential garages fail at the joints, the ramps and the oily bays first. On projects such as China Merchants' Cuican Mansion and the Xipai Jingyue development we renew traffic lanes and bays in phases, keeping half the garage usable throughout.

Häufige Fragen

Was Einkäufer bei der Spezifikation einer Bodenbeschichtung am häufigsten fragen.

Our floor is dusting badly. Densifier or coating?

If you need a hard, dust-free concrete surface and speed, densify. If you need colour, chemical resistance or washability, coat it — often both routes combine zone by zone.

Mehr erfahren
Can we avoid tearing out the old floor?

Usually yes. As long as the slab is structurally sound, the new system goes over it after grinding and repair — no demolition.

Mehr erfahren
How fast can we get back to work?

Densified areas come back within days; coated zones follow the curing plan. Everything is phased so shifts keep running.

Mehr erfahren
The old coating is still sticking in places — can it stay?

Possibly — adhesion testing decides. Sound, well-bonded areas can stay and be bridged; failing areas must go, or they will drag the new system down with them.

Mehr erfahren

Erzählen Sie uns von Ihrem Boden

Senden Sie uns Untergrund, Fläche und die Belastungen, denen der Boden standhalten muss. Sie erhalten ein empfohlenes System, eine Aufbauskizze und ein Angebot — in der Regel innerhalb eines Werktags.

Angebot anfordern